custom design rear sprockets.

[Agemax]

maybe in the wrong section, but never mind.....

has anyone toyed with the idea of custom designing their rear sprockets?

you can buy blank 530 Dural rear sprockets, any size from 30 -78T, i can get them machined to fit any hub size and mounting bolt PCD.
here is an example i knocked up quickly, the sprocket will be mirror polished and the black spiral pattern will be milled 1mm deep and filled with colour. its only an EXAMPLE so dont straight away knock the design, you can design your own.
or you could have slots,holes,shapes,words etc. machined out of the sprocket.



just gauging interest to see if its worth advertising them or not.
price estimate is under £50 GBP

[jwhelan65]

That one is making me dizzy

[Agemax]

That one is making me dizzy

its designed to hypnotize car drivers as you overtake them

[EvilEnfield]

I'd be interested.

[Agemax]

I'd be interested.

any ideas on a design you would like?

[Gregory]

Whatever the design, it would be for appearance when the bike is sitting still because you wont notice it when spinning.

Also, if you run a chain cover, that cuts down on the area that is visible.

One idea, Maybe just machine out some suzuki "s's"

[Agemax]

Whatever the design, it would be for appearance when the bike is sitting still because you wont notice it when spinning.

Also, if you run a chain cover, that cuts down on the area that is visible.

One idea, Maybe just machine out some suzuki "s's"

yeah thats the idea, appearance really. even if you did have sections machined out of them the weight saving will be negligable.

anything is possible i suppose as long as the mill can do it, although the mill i have access to is not PC controlled so designs will have to be relatively basic

[Gregory]

I guess you could do similar fancies on the brake rotors also