Announcement

Collapse
No announcement yet.

Chopzuki

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    There are two GS tanks under that primer. A GS750L holds the gas. It had the right overall dimension and rake to it. It was a bit ugly tho, so I cut apart the bikes original tank and welded it on top to get the body lines and the extra length. After that we filled in the gaps , added bondo and primer.
    I need a gas cap for this thing. I'd like one that sits low like the GS1000E but it has to fit the round indent of the 750L. The cap that I got with the tank sits about 5/8" above thv surface. That just won't do.

    Comment

    Working...
    X