I am looking for seats that match this one please. 1983 gs750T

[Guest]

Hi.

My seat looks like crap. It's mostly black duct tape from the p.o., and I would like to change that, however it's an odd year and nobody seems to carry it.
It's a 1983 gs750T with the obnoxious little lock in the rear or the seat. Pictures below.

Who has one like this and knows what it really came on? Is it a left over part? I was told this was not the original seat, can someone confirm/deny that?
If you have one that is the same. Let me know. That way I can order a cover until I can make something I like better.

Pictures






I can't put the original pictures here. They're huge.
Here's direct links.

http://i.imgur.com/3jqanwQ.jpg

http://i.imgur.com/LKkidYT.jpg

http://i.imgur.com/buaLpWX.jpg

http://i.imgur.com/qXDPU00.jpg

Thanks for any assistance you can throw my way.

[trtsmb]

My friend's 1100L seat looks a lot like that one down to the lock on the back.

[lurch12_2000]

That looks like the original stock seat. Remove the old cover and use this replacement in the link below. Not very hard to do and only $68. Check that your seat pan is not rusted beyond reusing and the foam is still mostly intact and in decent shape. You can buff off any rough edges or small chips in the foam with a sanding block. Do that slow and evenly.

http://www.motorcycle-superstore.com/43891/i/saddlemen-saddle-skins-replacement-seat-cover

TIP: Use a hair dryer to warm the new seat cover as you're stretching it on. May work better with someone helping you. Search helpful videos on youtube to help you get an idea of the process ahead of time.

[ennuii]

Trtsmb, what year. And they're out of stock for my year and make.

If I could verify this was in fact stock I can get pit to make them, but they're telling me because it is stitched not hest embossed then it isn't original.

[trtsmb]

If I recall, his 1100L is an '81. You can double check pictures of that seat at pit and see if it matches what you have.

[chef1366]

the sixteen valve 1100L was only made in 80

[almarconi]

This one is made for your year and model. I used one of theirs on my GS.

http://www.motorcycleseatcovers.com/order-item.asp?ColorID=1&Item=3789&Make=SUZUKI&HP=

[trtsmb]

I know it's all 1100L and you're probably right about it being an '80. It's the maroon bike in my sig pic.

[ennuii]

Spiffy. Thanks everyone. Didn't know of 2 of those sites. Ordered and praying lol.

[ennuii]

Fi ally discard my seat. It was 30% sticky duct tape adhesive. Frakking gross.

What kind of glue did you all use. It suggests weather stripping cement. The type it suggests doesn't seem to exist. So regular Weather stripping adhesive from autozone?