GSX550ES front guard on a 78 GS1000 ? anyone

[Guest]

Hi

Has anyone fitted the GSX550ES (83 onwards) front guard or tried to fit one to a GS1000?

If it does do you have any pictures you could share ?

Thanks
Marty

[salty_monk]

I'd be surprised if the width between the fork legs was the same...

[kingofvenus]

And it's from a bike with a 16in. front wheel.

[Marty]

Maybe stick to a GSX1100 .....

[Steve]

Let's verify terminolgy first.

By "front guard" do you mean the fender over the front tyre or the crash bars around the engine?

Either way, I would think the answer is "no", neither one would fit.

.

[Marty]

I'd be surprised if the width between the fork legs was the same...

As it turns out they are not, the GSX is wider by at least a cm

[Marty]

Let's verify terminolgy first.

By "front guard" do you mean the fender over the front tyre or the crash bars around the engine?

Either way, I would think the answer is "no", neither one would fit.

.

I am meaning front fender, and yes the GSX fender is too wide. I will opt for the GSX1100 after confirming the width is ok - some threads on here say it should fit but I will check sizes first!