.png "Powered by vBulletin")
Anyone have any type of experience with type of rattlecan? It appears to be a much higher quality (price wise). Of course I would use the 2k clear for fuel resistance. I am almost ready to tackle my first painting project and was thinking 2 cans of this http://www.66autocolor.com/House-of-...pm-s2-0821.htm And couple cans of 2K clear. It would be around $100.00. I realize that prep for painting is 99% of a decent end result. Just wanted to know if anyone had tried the House of kolor stuff...
-
Anyone have any type of experience with type of rattlecan? It appears to be a much higher quality (price wise). Of course I would use the 2k clear for fuel resistance. I am almost ready to tackle my first painting project and was thinking 2 cans of this http://www.66autocolor.com/House-of-...pm-s2-0821.htm And couple cans of 2K clear. It would be around $100.00. I realize that prep for painting is 99% of a decent end result. Just wanted to know if anyone had tried the House of kolor stuff... -
That Brandywine Kandy looks a lot like 82 1100 red. Keep us posted with how it works.......82 1100 EZ (red)
"You co-opting words of KV only thickens the scent of your BS. A thief and a putter-on of airs most foul. " JEEPRUSTY -
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Beautiful !!!Comment
-
post didnt work but link did... I just need to paint tank and sidecovers, and fin..Comment
-
13087522_1254161227934824_2349392256287727471_n.jpg
There's my baby.. Started out as your typical gnarly barnfindComment
-
How is the exhaust paint holding up, and what did you use?Comment
-
I used 1 can of SprayMax to do the tank,underseat trim and tail piece on my 78 1000:
Got three good coats of it from 1 can.The $22 that HOK wants seems a bit high,IIRC I paid less than that at up here in Canada in CAD.Comment
-
I've used House of Kolor paint before. The match is spot on when you provide them with the paint code. The cans work well and spray nice and evenly without the blotching that sometimes happens with cheaper paint as long as you keep the nozzle clear after each spray. They are a bit pricey but you get what you pay for.Current Bikes:
2001 Yamaha FZ1 (bought same one back)Comment
-
Just to be clear, I don't think House of Kolor sells paint in rattle cans. Some retailers repackage in rattle cans though.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
I've used House of Kolor in the past with good results. Never used the rattle can version though. Always purchased through TCPGlobal. They stock the canned version as well and provide good service.http://img633.imageshack.us/img633/811/douMvs.jpg
1980 GS1000GT (Daily rider with a 1983 1100G engine)
1998 Honda ST1100 (Daily long distance rider)
1982 GS850GLZ (Daily rider when the weather is crap)
Darn, with so many daily riders it's hard to decide which one to jump on next.;)
JTGS850GL aka Julius
GS Resource Greetings
Comment
-
Oh, but they do...or at least they used to. that's what I bought.Originally posted by Nessism View PostCurrent Bikes:
2001 Yamaha FZ1 (bought same one back)Comment
-
Also, their web site has a video of one of the employees using a spray can of their paint. They claim the spray can job will compare nicely to a spray gun.
I will wait for more input from the gallery here on GSR before I try it though. My bike will be painted hopefully this next winter.Larry
'79 GS 1000E
'93 Honda ST 1100 SOLD-- now residing in Arizona.
'18 Triumph Tiger 800 (gone too soon)
'19 Triumph Tiger 800 Christmas 2018 to me from me.
'01 BMW R1100RL project purchased from a friend, now for sale.Comment
-
Got a link?Originally posted by alke46 View PostEd
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
Comment