IMG_6174.jpg
Announcement
Collapse
No announcement yet.
Alumabrite - turned aluminum yellow?
Collapse
X
-
Alumabrite - turned aluminum yellow?
Read good things about Alumabrite. Tried it on the top section of these barrels. Seems to be turning the metal yellow. The left is untreated, the right is Alumabrite. Followed instructions. I can't find any threads on this. Any thoughts?
IMG_6174.jpgTags: None
-
Have never heard of the stuff (or used it), but I just looked at their site and read the "How to use" page.
The two biggest things I noticed were the note that it will not penetrate grease and/or dirt, so it needs to be applied to clean aluminum, and it needs to be diluted considerably. Did you follow instructions?
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
-
Dan
I did. I was using the NAPA version, which is a spray bottle. 30 seconds on, rinse off. Luckily I tested it before doing the whole block.
Screen Shot 2019-08-17 at 4.23.43 PM.jpg
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
The cylinder is painted silver. Seems that the stuff damaged the paint.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Dan
Didn't realize the cylinders were painted. I thought they were just that color, or maybe had a clearcoat. Thanks
Comment
-
If I recall correctly, only the lower half of the crankcase is not painted.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
Comment