Stainless Allen Bolt Set???

[ddaniels]

I got my kit. I somehow suspected them to be more shinier tho? Neatly organized in bags, and more than I expected (even some allen screws, hope those are for those round things on the top of the engine).

Also, where do I get an Ikea-torque-wrench?

I would think Ikea would have them...;-)

[Guest]

I also wonder, what covers can safely be removed without the oil falling out?

[Grimly]

I also wonder, what covers can safely be removed without the oil falling out?

If it's on the sidestand, you can remove the clutch cover.
You can copy that feat for the stator cover by either leaning the bike against a doorpost or propping up one foot of the centre stand on a 50mm thick slab of wood.

[Guest]

Is locktite 243 the right one to put on all these?
camchain tensions
clutch lever
secondary drive cover
starter cover
generator cover
points cover (???)
carb intake
cylinder head
cylinder head cover
oil pan/oil filter cover

[Grimly]

Is locktite 243 the right one to put on all these?
camchain tensions
clutch lever
secondary drive cover
starter cover
generator cover
points cover (???)
carb intake
cylinder head
cylinder head cover
oil pan/oil filter cover

Low to medium strength threadlocker for all general purpose fastenings that you think might come loose. 243 is ok.
Basically, blue Loctite for low to medium, red for stuff you seriously never want to come loose, or even ever come apart again without applying heat - sometimes a lot of heat.