Announcement

Collapse
No announcement yet.

petcock positions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    petcock positions

    my petcock has 3 positions on my 83 gs 750 up is open what are the other 2 positions off and i think prime

    #2
    It's a vacuum tap, it has two hoses -one for fuel and a smaller vacuum one that usually connects to (or near) the Number 2 carb. Three positions are Reserve/ On/ Prime. Manifold vacuum turns the tap on when the engine is running, off when the its not. So the tap stays in the ON position. RES if you run out of gas. The Prime position (PRI) by passes the vacuum tap and allows gas to flow into the carb bowls with the engine off. This is if you need to get gas into the carbs because they have been drained for whatever reason
    Last edited by KiwiAlfa156; 06-01-2022, 04:02 AM.


    "Johnny the boy has done it again... This time its a scrubber"
    Dazza from Kiwiland
    GSX1100SXZ, GSX750SZ, GS650GZ All Katanas, all 1982

    Comment


      #3
      Just be careful that if you ever put it into the prime position turn it back to On or you could have fuel in your engine. That’s bad juju
      Cowboy Up or Quit. - Run Free Lou and Rest in Peace

      1981 GS550T - My First
      1981 GS550L - My Eldest Daughter's - Now Sold
      2007 GSF1250SA Bandit - My touring bike

      Sit tall in the saddle Hold your head up high
      Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
      and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

      Comment


        #4
        ok got it ..thank you

        Comment

        Working...
        X