Lost micro clip from Mikuni 44500

[TheAlt]

[TheAlt]

New retaining sleeve installed.
A number 27 drill bit is just smaller than the pin
Then lathed the outer diameter to be a press in fit.

[Suzukian]

Great out of the box thinking!!

[Nessism]

If Nessism, you have that clip from this photo, PM me and I we can chat personal details. outside the forum.

At your request, I dug through my various carb spares boxes until I found one of those clips you wanted. I then responded back to your PM requesting a clip, saying I have one, and to send your address. After that...nothing. No response whatsoever. I even found a couple of different (new) accelerator pump diaphragms, thinking you could modify one to work in your application. And there you have it.

[TheAlt]

At your request, I dug through my various carb spares boxes until I found one of those clips you wanted. I then responded back to your PM requesting a clip, saying I have one, and to send your address. After that...nothing. No response whatsoever. I even found a couple of different (new) accelerator pump diaphragms, thinking you could modify one to work in your application. And there you have it.

Odd,
As i'm just now seeing a message in my inbox, yet I was online last night and in a new browser session.
Thanks for looking and finding.
I would be interested in them still as who knows if my mods work.
Let me reply to your message.

Alt

[TheAlt]

Carbs back together. We will see how long they last. The accelerator pump diaphragm is more flexible now, but it needs a replacement.
For kicks.
I gave it a shot of gas in the intake. (no gas tank on yet) and it cranked right over.
Will still replace the regulator. and probably with a Honda part if I find the appropriate one to replace the stock
RECTIFIER ASSEMBLY

product number: 3280044130
notes: 32800-33401

[Nessism]

SH775. If you don't understand the superiority of this unit, please do a search.

[TheAlt]

Runs on it's own carbs now with the tank.
I clear coated my tank after removing a dent.
Then today, spilled gas on it which ruined the clear coat instantly. POS. and it's an automotive clear too. double POS

Makes a HUGE difference in the battery being charged on how well it fires.
Running off a charger to an auto battery,
Will put on the real battery and take it around the block soon.

Needs tires, and an air filter. but close.
Thanks everyone.

Alt.

[Suzukian]

Great progress. I had some compression socks I purchased, just to see if they'd help with foot pain. The pairs were held together with these little 1.5" long pieces of Aluminum, around .100" of an inch wide, and maybe a millimeter thick. I thought, these would make perfect clips. Soft enough to bend into shape, but firm enough to hold the shape. Weird, eh?

[TheAlt]

Thanks,
Seems to run well enough so far.
Few gas leaks here and there. New gaskets on order.
New tires too.
Good looking bike and things are polishing up well when I work on it.
I mistakenly used Duplicolor clear on the tank top and of course it just came right off with gas.
So I will wet sand the top of the tank, and lightly fill and color match the shadow black for a few scratches then mask up and Spraymax 2x it.