.png "Powered by vBulletin")
Hi guys, Pulled these carb boots of my 77 gs 750. I was looking to replace the o rings but its got me kinda stumped. These look like they have none, Did the 1977 bikes use o rings? Or is this just a matter of the o rings being mashed flat?
-
Yes, according to Partzilla airbox fiche, the 77 GS750's used O-ring P/N 09280-32006 $1.89
Steve
1979 GS1000E (45 Yrs), 1981 GPz550 (11 Yrs) -
That looks waaay flat, almost looks like there is not one there, a pick or knife point will tell for sure.1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100Comment
-
I did some work investigating.apparently some early models like this one did not use a o ring. Instead the use what is called a feather ege to seal. Its Part # 13110-49000 as far as I can tell.Comment
-
Possibly. Only thing I found was intake pipe #13110-49001 and uses "O" ring part # 09280-32006. I also put your part # in ebay and found the intake pipe, clamp, and "O" ring all came in the set... I dun'no, I've not seen them without an "O" ring, but I ain't seen everything... Hope you get it figured out "FOR SURE".1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100Comment
Comment