Announcement

Collapse
No announcement yet.

To Seafoam or not to Seafoam

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    To Seafoam or not to Seafoam

    I just brought my '76 Honda 550F Super Sport out of a 12 year hibernation. Before I tucked it away I poured Stabil in the gas tank ran it around the block several times to get it through the carbs, parked it and drained the carbs. I was amazed that it fired right up and runs perfect. It idled right off the bat. Cool. But, it squirts a bit of gas out of the overflow tube when I run it or even turn the petcock on. It's only one carb doing it. Seems to me it might be a stuck jet. I really don't want to pull the carb rack if I don't have to. Has anyone tried Seafoam to maybe clean out a bit of dirt or sticky jet? Dammit, Jim, I'm a painter not a mechanic...
    1979 GS1000S,

    1982 Honda CX500 Turbo, 1982 Honda MB5 w/CR80 motor, 1977 Honda "nekid" Goldwing, 1976 Honda CB550F cafe', 1972 Honda XL250 cafe'

    #2
    Yeah, I'd try seafoam first for sure. My friend had a Honda Nighthawk he'd regularly let sit for months at a time. As long as you could actually get it running a high dose of seafoam would sort it out within half a dozen miles of riding....
    1980 GS1000G - Sold
    1978 GS1000E - Finished!
    1980 GS550E - Fixed & given to a friend
    1983 GS750ES Special - Sold
    2009 KLR 650 - Sold - gone to TX!
    1982 GS1100G - Rebuilt and finished. - Sold
    2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

    www.parasiticsanalytics.com

    TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

    Comment


      #3
      A fan of Seafoam as well.
      Sounds more like a stuck float instead of a jet. I would tap "firmly not a wallop" on the offending carb float bowl with the handle of a screwdriver or wood handle of a hammer.
      2@ \'78 GS1000

      Comment


        #4
        I'm a firm believer. What have you got to lose? Even if it don't help it, it sure can't hurt anything.
        1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

        Comment


          #5
          I like Seafoam. For stubborn issues I'll even dip into the B12 Chemtool.

          I was just writing about this elsewhere, but I have exactly the problem you're describing pop up a couple times a year on one or another of my bikes and I find that if I catch it early I can fix it by just driving around and leaking some gas for about twenty minutes. If not, I run it off a bottle, get it up to temperature, and then transition the fuel out for cleaner until the bike kinda chokes on it, then let it sit overnight. If neither of those works, then I'll pull the carbs and clean them.
          1978 GS750E, 1981 GS550T (550/673), 1979 Puch Maxi

          Comment


            #6
            I put a half can in my gravity bottle and fill the bowls. After a overnight soak in full strength sauce itll be ok. then add 2 ounces per gallon and ride away.
            Last edited by chuck hahn; 06-01-2024, 04:13 PM.
            MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
            1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

            NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


            I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

            Comment


              #7
              Originally posted by jimhickcox View Post
              I like Seafoam. For stubborn issues I'll even dip into the B12 Chemtool.
              Guys on Bob Is The Oil Guy don't have many good words for Seafoam. They do like the Chemtool, though. I like the carb spray. It dissolves brown varnish really nicely.

              Ed

              To measure is to know.

              Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

              Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

              Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

              KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

              Comment


                #8



                Originally posted by chuck hahn View Post
                I put a half can in my gravity bottle andfill the bowls.
                Originally posted by Nessism View Post
                Guys on Bob Is The Oil Guy don't have many good words for Seafoam.
                I have no scientific proof but I would stick to what it says on the label for the amount to add. I had some pretty clean carbs and was over-dosing with stable and seafoam and the new orings and rubber bits started breaking down in a matter of a couple years.....
                82 1100 EZ (red)

                "You co-opting words of KV only thickens the scent of your BS. A thief and a putter-on of airs most foul. " JEEPRUSTY

                Comment


                  #9
                  Originally posted by steve murdoch View Post
                  A fan of Seafoam as well.
                  Sounds more like a stuck float instead of a jet. I would tap "firmly not a wallop" on the offending carb float bowl with the handle of a screwdriver or wood handle of a hammer.
                  Thanks Steve, that was the first thing I did with my limited mechanical abilities. It seemed to help a bit but was not the cure all. I have a friend whose an excellent car mechanic that has told me not to use Seafoam, but I thought I'd pass along the question to my fellow motorcycle riders and you guys say try it, so I probably will this afternoon. I agree,as long as I follow the directions I have nothing to lose. Pulling carbs is a bi--h.
                  1979 GS1000S,

                  1982 Honda CX500 Turbo, 1982 Honda MB5 w/CR80 motor, 1977 Honda "nekid" Goldwing, 1976 Honda CB550F cafe', 1972 Honda XL250 cafe'

                  Comment


                    #10
                    I emailed seafoam directly and asked them if it will eat orings in motorcyle carbs specifically and they said no. I havent had any issues for many years of seafoam use.
                    MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                    1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                    NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                    I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                    Comment


                      #11
                      2old, Wondering if your car mechanic had what neg. effects Seafoam could have other than if it don't work you've wasted appx. $6.00?
                      1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

                      Comment


                        #12
                        WELL heres exactly what i did just 2 weeks ago when i picked up that 600 dollar gs1000. Started it and ran on choke but not with choke off. Classic clogged jets symptoms. So i emptied out the gravity bottle and dumped in half a can of straight seafoam Ran it on choke till it started popping and stuttering as gas was burnt off and bowls filled with seafoam. Next morning i drained the bowls and put gas to them. As you can all see in the video thats been posted all ill symptoms are gone and it runs like a scalded cat.
                        I rest my case on seafoam
                        MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                        1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                        NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                        I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                        Comment


                          #13
                          White oil and alcohol.
                          no one here studied any hs chemistry?
                          1983 GS 550 LD
                          2009 BMW K1300s

                          Comment


                            #14
                            Originally posted by rphillips View Post
                            2old, Wondering if your car mechanic had what neg. effects Seafoam could have other than if it don't work you've wasted appx. $6.00?
                            He told me it would damage rubber o-rings and just gum the small parts up worse. Earlier this afternoon I put about half a can into about three gallons of gas in the tank. Took it for a ride to get it mixed into the carbs, but it didn't help..at least directly after my ride. The one carb still spurts gas. Not a steady drip, but actual spurts of gas every 30 seconds or so with the petcock open. Hmmm. I'll fire it up tomorrow morning to see if letting it sit in the carbs overnight does anything. If it doesn't work or if it helps a little bit better then it was, I may go with Chuck's nuclear option.

                            1979 GS1000S,

                            1982 Honda CX500 Turbo, 1982 Honda MB5 w/CR80 motor, 1977 Honda "nekid" Goldwing, 1976 Honda CB550F cafe', 1972 Honda XL250 cafe'

                            Comment


                              #15
                              Larry.. Sounds to me like theres a tiny chunk of something jamming the float needle on that particular carb. Try running a line off the drain and putting petcock in the PRI spot and run some gas through it to give it a flush. See if theres anything in whats flushed into your catch can. Ive had little specs of what i can only assue was fuel line rubber sloughing off from just being old and deteriorating. IF the fuel lines 4 or 5 years old it may worth changing tat too.
                              MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                              1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                              NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                              I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                              Comment

                              Working...
                              X