Announcement

Collapse
No announcement yet.

Mikuni RS 38 accelerator pump trouble!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Mikuni RS 38 accelerator pump trouble!

    Hi everyone, first time here so let me know if I don't use the proper format. I bought a set of RS 38s and the bike runs good but the accelerator pumps aren't working. The carb with the pump in it does squirt but the other 3 don't . does anyone have experience with these ? Also I've seen a lot of people eliminate this but I'd rather get them working properly if I can.
    Thanks in advance !

    #2
    The pipework between carbs can block. A careful strip and squirt carb cleaner through the passages usually works.

    Comment


      #3
      The nozzles are extremely small, and easily clogged too.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

      Comment

      Working...
      X