What GS1100E exhaust is this?

[oldGSfan]

Fits the '83 and of course '82 GS1100E. It has lots of springs and can be disassembled to the header pipes, mid-section, and canister. It weighs 13.5 lbs, pretty light. I see no ID on it tho. Any help is appreciated.

[Rob S.]

Well, we can rule out the V&H "Street Megaphone." It's closer to the V&H "Supersport" canister, but I'm fairly sure it's not that either. It's a little hard to tell off the bike.

It looks like it might be something cobbled together by a PO. Perhaps the forward part (headers) is stock 82-83 11E.

[Big Block]

Nope the headpipes aren't stock, outer ones are two piece welded and the cylinder head flanges are all the same style..

[Nessism]

I don't know the answer, but Hindle sold similar pipes.

[rphillips]

Too professional to be cobbled together, all those springs should tell what it is. Just gott'a somebody that had one needs to see the picture..

[oldGSfan]

I found a dyno sheet that says it was fitted with a V&H pipe, so that's a clue that it could be the one.

[Rob S.]

I don't think it's a V&H "Sidewinder."

[Cipher]

Listing on CL as V&H

[Cipher]

so its a 4-2-1 and if its a yoshi pipe where are the plate and at least the rivet hole for it?
ALso yoshi pipes ive seen always had an angled tip ont he exhaust.

Is it in your posession? Its well worth 100 USD if it fits.
It is clearly not chinesium with that much patine
the welds are really nice and there is not a bit of physical damage to be seen.

[oldGSfan]

so its a 4-2-1 and if its a yoshi pipe where are the plate and at least the rivet hole for it?
ALso yoshi pipes ive seen always had an angled tip ont he exhaust.

Is it in your possession? Its well worth 100 USD if it fits.
It is clearly not chinesium with that much patine
the welds are really nice and there is not a bit of physical damage to be seen.

I have it in my possession, yes. It is most definitely a GS1100E fitment. I could easily disassemble and ship it, which is nice. There are no dents, no physical damage. There is some surface corrosion, but very light and probably will clean up very well, if it is ceramic as the other doc I found says, it seems like it should, anyway. I will give it a scrub in the AM and post more pics.

To the best of my knowledge, given what my papers show, it is 'probably' a V&H. I don't know what you mean about the plate and rivet hole tho.

I am asking $100, if it's not a V&H, my bad. But it seems too much coincidence to have V&H mentioned in my docs. Stay tuned folks.

[bonanzadave]

I don't know what you mean about the plate and rivet hole tho.

Maybe that plate and rivet holes.........

s-l1600.webp

[oldGSfan]

Maybe that plate and rivet holes.........

Ah - this one has little Allen screws.

[rphillips]

My period correct Yosh. had the nameplate glued on, no rivet holes, it soon came off & I got, and glued on another that is still there. Haven't had it mounted for probably 10 yrs. as I like my center stand and changing oil without having to remove it... Opinions again, It's still the best sounding pipe I've "EVER" heard.