.png "Powered by vBulletin")
My recently acquired 1980 850G has some exhaust damage on the RH side. Nothing major, but I might have access to a cleaner exhaust from a 1980 1000G.
There are some obvious differences, such as the 850G exhaust has a connected between the inner pipes while the 1000G exhaust is a pure 4-into-2 with separate LH and RH sides.
Can they be swapped or are there differences in exhaust port location, rear mounting points, back pressure tuning, etc.?
More broadly, is there a list of the common parts? I know the engines are different, but everything else looks sooooo similar.
In this case, the Partzilla fiche doesn't help as it only has a listing for the 850GL, so I can't check if frame #'s are the same.
There are some obvious differences, such as the 850G exhaust has a connected between the inner pipes while the 1000G exhaust is a pure 4-into-2 with separate LH and RH sides.
Can they be swapped or are there differences in exhaust port location, rear mounting points, back pressure tuning, etc.?
More broadly, is there a list of the common parts? I know the engines are different, but everything else looks sooooo similar.
In this case, the Partzilla fiche doesn't help as it only has a listing for the 850GL, so I can't check if frame #'s are the same.