.png "Powered by vBulletin")
if any one has ever messed with the petcock what is the fuel line size and is that ID or OD. and second what size is the petcock threads. i called a place and there saying 3/8 pipe threads but i thought that they would be bigger
-
-
What bike?
The stock fuel line is 7mm. That makes it larger than 1/4" and smaller than 5/16".
Petcock threads? All the petcocks I have seen on GS bikes had a large hole through which the filter and reserve assembly went, and two 6 x 1.0 mm theaded holes for the bolts. And why would anyone think there would be a 3/8 INCH thread on a METRIC bike?
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
its a 1980 gs 750. im trying to replace it but i dont have the money to spend on a 100 or so dollar petcock im gonna make my own but instead of buying it.Comment
-
They sell them at www.z1enterprises.com for about $40. If one from an 83750ES will work for you I have one you can have for $20.
It works but you'll need new O rings for the bolts. The body O ring itself doesn't look too bad.
Dan
1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/Comment
Comment