Announcement

Collapse
No announcement yet.

83 GS1100GL Idle Issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    83 GS1100GL Idle Issue

    The bike idles fine while warming up but after the motor is good and hot the tach shoots up to 3 and won't come down. I have tried adjusting the throttle stop in and out with no effects, I am lost on this one I have never had much luck with this type of carbs.

    #2
    Sounds like a classic air leak. Typical suspect is the boot between the carb and the head. Could have a cracked boot, but most likely a bad o-ring between the boot and the head. New o-rings are available rather inexpensively at cycleorings.com. You might want to also consider getting the stainless screws to hold the boots to the head, as the stock screws seem to be made from something that resembles lightly-aged Cheddar cheese.

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment


      #3
      I will have to check for vacuum leaks around the boots. Where is a good place to buy new boots?

      Comment


        #4
        BassCliff will be along shortly with his little Mega-Welcome that is just chock-full of such information, but here is my list of favorite suppliers:

        Alpha Sports
        Babbittsonline
        Bike Bandit
        Carolina Cycle
        Cycle Parts Nation
        CYCLE-RE-CYCLE
        Full throttle
        Motogrid
        MR Cycles
        PartShark
        Partsnmore
        Ron Ayers
        Z1 Enterprises

        Alpha has a very nice search engine, but the highest prices. Bike Bandit is next in prices, then all the rest, but it pays to shop around.

        .
        sigpic
        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
        #2 son: 1980 GS1000G
        Family Portrait
        Siblings and Spouses
        Mom's first ride
        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
        (Click on my username in the upper-left corner for e-mail info.)

        Comment


          #5
          Greetings and Salutations!!

          Hi Mr. shagnasty,

          I recently refurbished my air intake system. Here's the documentation...

          Air Intake Repair:
          (Airbox removal, intake boots and O-ring replacement)

          In your "mega-welcome" below there are a couple of maintenance lists. These are the necessary tasks to transform your bike into a properly running, reliable, classic motorcycle.


          If there's anything else you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

          Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...

          Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

          Thanks for joining us. Keep us informed.

          Thank you for your indulgence,

          BassCliff

          Comment

          Working...
          X