Announcement
Collapse
No announcement yet.
Carb Dipping Question
Collapse
X
-
Turtleface
Carb Dipping Question
I'm pretty sure it's ok, but I thought I'd ask, just in case. There's no harm in allowing some time to pass between dipping and re-assembly, right? It might be a few days until I get my o-ring kit in, but I'd like to get started. It'll give me something to do inbetween letting coats of paint dry.Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35585
- Torrance, CA
No worry.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
Turtleface
-
Just be sure to rinse them with warm water, then use some carb spray through the passages (don't forget to wear your safety glasses) then following with compressed air.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Turtleface
Oh yeah, I'm a perfectionist. It'll be done right. These things are much less intimidating that I originally thought. Opening them up has actually been pretty fun. With the exception of the few screws that I've stripped, even using my impact driver. Oh well, switching it all over to stainless allens anyways, so it's a slightly moot point.
Comment
-
after you dip and rinse and dry them I like to spray the bodies with some wd-40 and let them sit for a day and wipe off the excess, i find it helps keep the bodies a little cleaner and less likely to corrode. The wd will work it's self in the pores which the dip has opened up.78 GS1000 Yosh replica racer project
82 Kat 1000 Project
05 CRF450x
10 990 ADV-R The big dirt bike
P.S I don't check PM to often, email me if you need me.
Comment
Comment