.png "Powered by vBulletin")
Which Pingel adapter plate do I need? Its for a '83 1100E.
-
-
Hi,
Measure the distance (center to center) of your petcock bolt holes.
Thank you for your indulgence,
BassCliff -
I don't have access to the bike at the moment. Its in a friends garage and he's out of town, but I want to order the parts.Comment
-
1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Thank ya sir, much appreciated!Comment
-
Just be prepared you will have to file the center tank opening (not the bolt holes) so you can get the reserve tube to fit. (was so on my ED)Comment
-
Thanks Bill.Originally posted by chef1366 View Post
I wasn't trying to be coy. I wasn't familiar with the setup and wanted to make sure Mr. eric_banks32 got the right plate. Thanks for putting up with me.
Thank you for your indulgence,
BassCliffComment
-
What are you talking about "putting up with you".
You are quite agreeable.
1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
My one for my 80 Gs1100E bolted right on, no filing. Cant say if the 83 is the same thoughComment
-
I agree. Always agreeable and quite helpfulOriginally posted by chef1366 View PostWhat are you talking about "putting up with you".
You are quite agreeable.
Comment
Comment