Any suggestions for new pipes for my Katana? 4-2 is the preferred solution, but 4-1 may be the way to go?
Announcement
Collapse
No announcement yet.
Exhaust for GS650 Katana
Collapse
X
-
magn(e)um
Exhaust for GS650 Katana
The pipes are rusty and full of holes, and it’s time for some new....
Any suggestions for new pipes for my Katana? 4-2 is the preferred solution, but 4-1 may be the way to go?Tags: None
-
BassCliff
Hi Mr. magn(e)um,
Vance and Hines, Mac, Laser, or used stock items from ebay. Shop around. Take your pick.
I just stopped by to welcome you to the forum in my own, special way.
If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....
Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...
Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!
Thanks for joining us. Keep us informed.
Thank you for your indulgence,
BassCliff
-
magn(e)um
It is hard finding a good GS exhaust here in Norway. Is ther any other Suzukis using parts I can "swap with"?
Comment
-
BassCliff
Hi,
The exhaust from the GS550 should also fit. I don't think any others will. If you want new, the Laser exhausts would be more likely to have a stock-looking 4-n-2.
Thank you for your indulgence,
BassCliff
Comment
Comment