Announcement

Collapse
No announcement yet.

What size fuel, vacuum, and vent lines??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    What size fuel, vacuum, and vent lines??

    Hi Folks....I'm putting my 1982 GS650GL back together...and need to replace the rubber hoses to the carbs. I know it's been posted before, but I just can't find it again. How much of what sizes should I shop for before I put the carbies back in?


    Thanks.........Keith

    #2
    Greetings and Salutations!!

    Hi Mr. Keith H,

    I don't believe I've had the pleasure. Here you are with 6 posts and I haven't given you the "mega-welcome". But first, check out this page on my little website:

    Where Do These Hoses Go?

    And you can find a manual for you bike on my site too. It will have all kinds of handy information. Now, let's get started...

    I just stopped by to welcome you to the forum in my own, special way.

    If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

    Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...

    Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

    Thanks for joining us. Keep us informed.

    Thank you for your indulgence,

    BassCliff

    Comment


      #3
      I knew I saw it somewhere!

      There it is! Exactly what I remembered seeing. Oh and thank you. For the warm welcome....and for the great information you've posted on your site. You've helped me more than you know.....and now it's a pleasure to meet you!

      Keith

      Comment

      Working...
      X