Announcement

Collapse
No announcement yet.

1980 GS 550 fuel lines

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1980 GS 550 fuel lines

    I saw the post down below about replacing the fuel line in a GS750 and I'm curious if it easier/harder and what to expect when putting fuel lines on a 1980 GS 550.

    Also what site do you all use when ordering GS parts?

    Thanks in advanced for the help.

    #2
    Changing the fuel line is easy. It's the pulling the carbs to get access that's the hard part.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Greetings and Salutations!!

      Hi Mr. kparrot,

      I just stopped by to welcome you to the forum in my own, special way.

      If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

      Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...

      Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

      Thanks for joining us. Keep us informed.

      Thank you for your indulgence,

      BassCliff

      Comment


        #4
        Where do you all go for parts?

        I've looked around on bikebandit.com but I'm new to this.

        Comment

        Working...
        X