Announcement
Collapse
No announcement yet.
Are these smoothbores? I think not
Collapse
X
-
Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35717
- Torrance, CA
Most likely some sort of Kawasaki carbs- 28mm maybe. Looks like one of the float bowls is different which could mean these have an accelerator pump.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
rasndas
Those look just like a set of mikunis I worked on off of a 79 kawasaki kz1000. They do use an accelerator pump. Not sure of size though.
Comment
-
tejasmud
34s? lol
No.
Edit:
The spigot outside diameter measures 34mm. That has to be where the "34" is coming from.
I would agree with Ed on them being Kawi 28s.
They are missing the fuel connections it appears, and can't tell if they have fuel screws.
But, they could be the "rarity" 29s with a pump, but I doubt it. Worth more than $400 if they are.
VMs look so close on the outside. Float bowls usually are a sign, but without seeing under the filters and looking at the throat or actually seeing the jet block.
No real way to tell from those pictures.
ELast edited by Guest; 05-26-2010, 01:59 PM.
Comment
-
madjack57754
Most likely 26s with accelerator pump as noted . Look at the float bowl on the second carb in on the right. Lookes like a deep well for a pump.
Comment
-
Spyderman
Comment
Comment