Announcement

Collapse
No announcement yet.

Are these smoothbores? I think not

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Are these smoothbores? I think not


    #2
    Most likely some sort of Kawasaki carbs- 28mm maybe. Looks like one of the float bowls is different which could mean these have an accelerator pump.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      ummmm
      not 34's
      but hey.......
      they come with the best air filters(P O D S) made
      F in idiots.
      they shouldn't be allowed to breed or else we can beat there young like a baby seal.

      Comment


        #4
        Those look just like a set of mikunis I worked on off of a 79 kawasaki kz1000. They do use an accelerator pump. Not sure of size though.

        Comment


          #5
          34s? lol

          No.



          Edit:

          The spigot outside diameter measures 34mm. That has to be where the "34" is coming from.

          I would agree with Ed on them being Kawi 28s.

          They are missing the fuel connections it appears, and can't tell if they have fuel screws.

          But, they could be the "rarity" 29s with a pump, but I doubt it. Worth more than $400 if they are.

          VMs look so close on the outside. Float bowls usually are a sign, but without seeing under the filters and looking at the throat or actually seeing the jet block.

          No real way to tell from those pictures.


          E
          Last edited by Guest; 05-26-2010, 01:59 PM.

          Comment


            #6
            Most likely 26s with accelerator pump as noted . Look at the float bowl on the second carb in on the right. Lookes like a deep well for a pump.

            Comment


              #7
              not 29's the float bowls have out put for overflow tubes not a 17mm nut to change the main jets

              Comment

              Working...
              X