Pilot air screw Gs650GLz

[triflow28]

Hello all, new to forum and need an experts help. I am in need of some pilot air screws, backed my old ones out but damaged them in the process. Where is a guy supposed to get some pilot air screws (the ones that come preset at the factory, and are hidden underneath the anti tamper cover at the top of carbs) I've looked everywhere no luck! I have an 82 Suzuki Gs 650 Glz (mikuni bs 32ss Carbs) Thank you all for your time.

[mike_of_bbg]

Other than asking on the parts wanted forum, you can get them in the carb rebuild kits sold at Z1 Enterprises:

http://www.z1enterprises.com/detail.aspx?ID=503

Normally carb rebuild kits are not recommended, but new idle mixture screws are one place where I do see them recommended. Unfortunately you have to buy a $23 kit to get one screw... Well if you messed up all 4 you won't have to worry about buying pilot passage jet plugs or float bowl gaskets

[SqDancerLynn1]

You are correct. You need to get the KIts. Make sure to get the correct ones, The two common kits are K&L & Keister. The K&L have the mixture screw. You can usually get them on Ebay

http://cgi.ebay.com/ebaymotors/4-SUZUKI-81-83-GS650-CARB-KITS-/360256169647?cmd=ViewItem&pt=Motorcycles_Parts_Accessories&hash=item53e0f0e6af

[Nessism]

You can get the screws seperate from the kits. Z1 used to sell them but I haven't checked lately. Another place to check is partsnmore.com

http://www.z1enterprises.com/detail.aspx?ID=2568

http://www.carbkitscapital.com/carb_kit_list_part.php?make=Suzuki&cat=Mixture_Screw

[chef1366]

I have some and some carb bodies off a 650.

[BassCliff]

Greetings and Salutations!!

Hi Mr. triflow28,

You might be able to find just the parts you need at one of the online carburetor parts vendors in your "mega-welcome". Here ya go...

I just stopped by to welcome you to the forum in my own, special way.

If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...

Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

Thanks for joining us. Keep us informed.

Thank you for your indulgence,

BassCliff

[triflow28]

Thank you all for your help