Announcement

Collapse
No announcement yet.

Carb Dip and Pilot Jet Plug

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Carb Dip and Pilot Jet Plug

    Firstly:

    I tried my local automotive store, Canadian Tire, and Princess Auto - no carb dip. Can I use solvent? Is there a better "alternative"?

    Secondly:

    My pilot jet plug is a little worn and is showing cracks - but not cracks all the way through... just "wear lines"... it is not "snug" in the pilot jet hole (but I don't know if this is normal or not) - does the pilot jet plug need to be replaced?


    #2
    Carb Cleaner

    As far as the carb dip goes, you can go to any auto supply store that carries kleen-flo products (any Uni-Select or NAPA store will do) and order a 4L can of Kleen-Flo part #651 Carb Cleaner. Regular price is $32.90 Canadian. The only drawback is it does not come in a regular 1 gallon can with the dipping tray.

    Make sure you use it outside, or in a well ventilated area since this stuff is STINKY!

    Someone else who is more knowledgeable should be able to answer you pilot jet plug question. I would likely replace it, I believe another GSR member sells them.

    Best of luck, and I hope this helps.

    Comment


      #3
      The pilot jet plugs are available at the usual parts vendors. Go to cycleorings.com for o-ring kits. That's the one run by a member here.

      Oh yeah, the plugs are cheap. Go ahead and replace 'em. New ones are so snug in the hole you'll have some difficulty seating them. The float bowl will probably hit the plug before the bowl seats against the mounting flange. Use the bowl mounting screws to draw it down the last 1.2 mm when installing the bowl.
      Last edited by Dogma; 06-08-2010, 09:08 AM.
      Dogma
      --
      O LORD, be gracious to me; heal me, for I have sinned against you! - David

      Skeptical scrutiny is the means, in both science and religion, by which deep insights can be winnowed from deep nonsense. - Carl Sagan

      --
      '80 GS850 GLT
      '80 GS1000 GT
      '01 ZRX1200R

      How to get a "What's New" feed without the Vortex, and without permanently quitting the Vortex

      Comment


        #4
        Buy the plugs from "georgefix" on Ebay.
        1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
        1985 GS1150ES stock with 85 Red E bodywork.

        Comment


          #5
          Originally posted by chef1366 View Post
          Buy the plugs from "georgefix" on Ebay.
          Done... and geeze is George fast... shipping today!

          Comment


            #6
            Originally posted by Macguyver View Post
            As far as the carb dip goes, you can go to any auto supply store that carries kleen-flo products (any Uni-Select or NAPA store will do) and order a 4L can of Kleen-Flo part #651 Carb Cleaner. Regular price is $32.90 Canadian. The only drawback is it does not come in a regular 1 gallon can with the dipping tray.

            Make sure you use it outside, or in a well ventilated area since this stuff is STINKY!

            Someone else who is more knowledgeable should be able to answer you pilot jet plug question. I would likely replace it, I believe another GSR member sells them.

            Best of luck, and I hope this helps.
            Welcome to Newfoundland... I tried Canadian Tire, Automotive Supplies, Colonial Garage, Princess Auto, Janitorial Services Inc, Browne's, Carquest, AND NAPA... no one carries any form of carb dip.

            That said, NAPA can get me in 4 litres of Hydroseal for $50.00 and it will be here in 7-10 days. I ordered it and will soon be the most popular carb cleaning guy on the east cost of Newfoundland. If anyone in St. John's or surrounding needs to dip their carbs... or pistons... or whatever... in 7-10 days I am your man.

            Comment

            Working...
            X