.png "Powered by vBulletin")
Any recommendations? Tried ebay, but couldn't seem to find what I was looking for. My bike has 2 carbs. thanks
-
-
Hi,
Just get a couple of float bowl gaskets and a couple of rubber plugs for the pilot jet openings. Then order a carb O-ring kit from Robert Barr at http://cycleorings.com, and follow the Carb Rebuild guide to the letter. You'll be fine.
Thank you for your indulgence,
BassCliffLast edited by Guest; 06-15-2010, 03:34 PM. -
You may not even need the gaskets and plugs, but the O-rings are a must.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
@all..thanks gents. Will take them off tomorrow and begin the process.Comment
-
If these are the CVs they are 34mm and I bet the 1000/1100 carb kits would work.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Robert Barr made a 450 kit so no worry.Originally posted by chef1366 View Post
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
Comment