Announcement

Collapse
No announcement yet.

White dots in my carbs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    White dots in my carbs

    Hi guys. Just finished dipping my set of carbs. left each body in for about 15 hours. I took them out then went directly to the sink to wash the dip off of each body. When I left them to dry, large white spots appeared all over the bodies. I went back to the sink to try and wash the spots off but they keep coming back everytime I leave them to dry. How do I get rid of this oxidation? I have been washing them for about 4 days now and the spots are still returning. Thanks in advance

    #2
    Sometimes those white spots show up regardless of anything wrong you might have done. I suggest you spray down the carbs with WD-40 to aid the drying process. Of course this assumes you dipped the carbs in the proper carb dip sauce and not into something corrosive like Simple Green.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Ok thanks Nessism. Will try that. I dipped it in the Barryman's everyone talks about.

      Comment


        #4
        I usually rinse mine off water and then with spray brake cleaner after the dip. Gets rid of the water and any residue from the Berrymens dip

        Comment

        Working...
        X