Announcement

Collapse
No announcement yet.

how do I fit this fuel sender?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    how do I fit this fuel sender?

    I recently purchased another 2nd hand fuel sender unit as mine was stuffed (one of the terminals snapped off) but the unit I got is different. The sender unit isn't attached to the backing plate. It has a metal bracket with 2 holes in it but I can't work out how to fit it. Am I missing a part?

    #2
    heres a pic of my old one with the unit and plate as one unit

    Comment


      #3
      Hi,

      Drat! I didn't take a picture of the other side. But like your old one, it was tack-welded onto the cover plate.



      I'm not sure you can use that "new" part you have.


      Thank you for your indulgence,

      BassCliff

      Comment


        #4
        think i may have got a dud. Probably for another model, the unit must fix to something I don't got the old one works fine but the +terminal broke off- it had already been soldered back on by a PO. And it's impossible to repair as its within that plastic core. Will have to look for another.....

        Comment

        Working...
        X