BS34 Carb slides

[mike10]

Is there a way to repair the rubber gaskets. The whole slide is 100bucks to replace. I have a extra set of carbs I want to rebuild. Thanks

[Nessism]

You might want to post an ad in the Parts Wanted forum. Lots of people have parts carbs (including me). How many do you need?

[mike10]

rubber on slides

The rubbers on the slides seem to be letting go right where the thicker outer ring is connected. On all but 3. The slides all have a nasty yellow stain on 1 side. The rest of the rubber looks OK. Repairable or junk?

[FlyingSteve]

Look here? https://www.partsnmore.com/cat_index...&category=carb

[chef1366]

Look through the rubber on the slides into a bright light or sunlight and see if you can see pin holes or holes in the diaphram.

[mike10]

Thank You

Look here? https://www.partsnmore.com/cat_index.php?model=gs&category=carb

Looks like everything I might need lower price too.

[mike10]

I did that

Look through the rubber on the slides into a bright light or sunlight and see if you can see pin holes or holes in the diaphram.

I didn't see any pin holes. But the outside ring has places where you can see light where it's coming loose from the rest of the diaphram.

[mike10]

I didn't see any pin holes. But the outside ring has places where you can see light where it's coming loose from the rest of the diaphram.

I think i'll just let these carbs sit a while. Costs too much to fix them up for no reason.