Most dumbest exaust mod?

[Guest]

http://www.gixxer.com/forums/showthread.php?t=270814

I believe 'Bizarre' is the correct word

Can anyone better that?

[Turtleface]

Nah, the only real thing wrong is how the dude has lain his bike on it's side to work on it. You see these cutouts on street/strip cars all the time. it's pretty worthless on a bike though, since they're much more sensitive to intake/exhaust changes. If it's a fuelie, the ECU might be able to compensate. I'm willing to bet, however, that the owner of that bike can't ride it to it's limits in stock form, and should probably spend hs time and money just riding it. Practice makes you faster than any mod could.

[SVSooke]

Well he didn't cut hole in his frame so it's better than some.

[Macguyver]

Some people just shouldn't be allowed near powertools.

[93formulalt1]

I was wondering when that was going to make it over here. . . I'm a member over there as well (also own an '01 GSXR 600), and noticed that thread right after it was posted.

Besides the fact that he hasn't tuned the bike for it and it will likely kill his power, he also installed the ALUMINUM butterfly valve by WELDING it to STEEL. . . It won't hold. Then, he's going to be riding around with a massive hole in his exhaust.

That guy embarrasses any self-respecting GSXR rider with half a brain. . .

Not quite as bad as Shervin, the guy who cut holes in his Ninja's frame for home-made "Ram Air". . .

[kochic]

its a case of ''i need my tools taken away''
Marc

[gpd211]

That guy embarrasses any self-respecting GSXR rider with half a brain. . .

From every forum I've ever read I didn't know they existed. Just kidding. but the gixxer has a rep as a squid bike. I know there are a LOT of excellent rides on them. It's just the stupid ones that get all the attention.

[FlyingSteve]

he also installed the ALUMINUM butterfly valve by WELDING it to STEEL. . .

Maybe he's actually incredibly intelligent and came up with a new welding process for just that application? That mod and the way he laid his bike over made me strap my lollerskates on and LMFAO all the way to my ROFLcopter.

[tx2000bob]

ahhh squids

it's funny just reading a squid board, with the immediate sarcasm coming from names like southernc0cksucker and chubbychaser. My favorite comment: "You need to get together with this guy and start designing a prototype GP bike. Just start with a stock bike and procede to fill it with holes."

[Buffalo Bill]

In his own words…

I read down the postings, this is his answer for why:

“What inspired me to do this? well I've always wanted a loud exhaust but not permanently,

I'd love to cause ruckus in the city once in a while but hate having a loud as **** bike while I'm riding 20+ minutes, it just gets very annoying to have a loud bike all the time.

As far as performance goes, i have no figures to show the improvements. but I can absolutely feel the bike pulling harder and when I open the valve.

might be just in my head though, cause the sound really does cause an adrenaline rush

on deceleration, the engine does not slow the bike down at all it just pops and spits out and like a maniac!!! I love this mod.”

Hope the cops nail him!

[Billy Ricks]

I read down the postings, this is his answer for why:

“What inspired me to do this? well I've always wanted a loud exhaust but not permanently,

I'd love to cause ruckus in the city once in a while but hate having a loud as **** bike while I'm riding 20+ minutes, it just gets very annoying to have a loud bike all the time.

As far as performance goes, i have no figures to show the improvements. but I can absolutely feel the bike pulling harder and when I open the valve.

might be just in my head though, cause the sound really does cause an adrenaline rush

on deceleration, the engine does not slow the bike down at all it just pops and spits out and like a maniac!!! I love this mod.”

Hope the cops nail him!

He'll have his exhaust valves burned up soon enough. I really like the guy they linked with the ZX that cut his frame up near the steering head so he could run intake snorkels through the frame. He cut up his fairing too for some reason. From what I could gather he was trying to cut 50lbs off the bike. He'll lose that and more when the front of the bike snaps off.