Announcement

Collapse
No announcement yet.

just up the carb back

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    just up the carb back

    alright i got a gs450t and i took the carb apart cleaned it... cut the exhaust installed pods... rejetted at 30 pilot and 130 main... as soon as the start the bike its reving at 6000 rpm keep in the mind that i have not tunned the idle or anything what should i do... i don't want to the bike reving so high especaillly when its been sitting for 3 weeks and its the first time i just started it

    #2
    now to make things better i have gas leaking from the air pod... just one of them... uhhhhh

    Comment


      #3
      Make sure that the cable is connected correctly and that the idle screw is backed far enough out thet it doesn't hold the plates open. Restart...

      The fuel leaking out is a stuck float or poorly rebuilt carb.

      Comment


        #4
        Well now you have a stuck float or bad O ring on the float seat, float level too high?
        Need to take those carbs back apart. Make sure the throttle cable is not too tight

        Comment

        Working...
        X