Announcement

Collapse
No announcement yet.

exhaust q's

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    exhaust q's

    I need to replace the exhaust on my 450. The headers are in good condition but the cans are completely rusted out and have holes in them. The only aftermarket I found is a mac 2 into 1 megaphone. I have a few questions for everyone.

    1. Can I clean out the inside and replace the baffle?

    2. Does the crossover pipe need to be there or can I block it off?

    3. Can I Block the left pipe just after the crossover to make a 2 into 1 header and "patch" a slip-on can to the right pipe?

    I know that I will have to rejet which is no problem. I'm just looking for some suggestions.

    #2
    I suggest going down to your local Harley shop and picking up a couple of cast off stock muffler and weld them onto the stock head pipes. Several people around here have done this with good results. Cheap and effective.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Great news!!! I will check it out. Will it have that hardley sound? Not big on that!

      Comment


        #4
        Originally posted by bluepinner View Post
        Great news!!! I will check it out. Will it have that hardley sound? Not big on that!
        No, but it will make your bars vibrate when you are at a stoplight.

        Comment


          #5
          Vibrations are ok as long as i'm not shakin like richard simmons!

          Comment

          Working...
          X