Announcement

Collapse
No announcement yet.

1000+ rpm raise after riding for a hour or so

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1000+ rpm raise after riding for a hour or so

    carbs need synced i know this

    but i have the idle at 900 +/-100

    then after 20 mins or so it will be about 1500 +/-100 or so


    then after a hour or so its around 2000 +/- 200


    would the carbs being out of sync do this?

    or any other ideas

    #2
    Have you replaced the intake boot O-rings?
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      sounds like an air leak at the carb boots...could be either side. mine did/does this but I haven't replaced the carb boot rubber yet. No matter how tight you get the hose clamps.

      Annoying, yes.

      Embarassing...at a stop, yes.

      Damaging...depends. I think it means she is likely running LEAN (too hot!). If where you live it's very hot in the summer over time this can be very bad. For me, the least of my worries as I never rode more than 60 mins or so.

      Bad news is I've been shopping for boots myself. Seem to be $25-30 EACH...x8 that a lot of green! But easy enough to fix.

      Might as well visit cycleorings.com and order up those too...for $14.00....(much better!)...

      and put 1 issue to bed...

      Comment


        #4
        Carb boot O-rings are cheap. Most of the time that is all you need. Running the bike with a vacuum leak can damage the engine so it's not advised.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          Originally posted by jbs80106 View Post

          Bad news is I've been shopping for boots myself. Seem to be $25-30 EACH...x8 that a lot of green!
          x8? You running a V8 in that thing?

          Comment


            #6
            4-head
            4-air box

            Comment


              #7
              You might check the petcock vacuum line, Carb sync can change the idle, but more likely an air leak as things expand when hot

              Comment


                #8
                Originally posted by blowerbike View Post
                4-head
                4-air box
                I just hate math...

                Comment


                  #9
                  Originally posted by jbs80106 View Post
                  sounds like an air leak at the carb boots...could be either side. mine did/does this but I haven't replaced the carb boot rubber yet. No matter how tight you get the hose clamps.

                  Annoying, yes.

                  Embarassing...at a stop, yes.

                  Damaging...depends. I think it means she is likely running LEAN (too hot!). If where you live it's very hot in the summer over time this can be very bad. For me, the least of my worries as I never rode more than 60 mins or so.

                  Bad news is I've been shopping for boots myself. Seem to be $25-30 EACH...x8 that a lot of green! But easy enough to fix.

                  Might as well visit cycleorings.com and order up those too...for $14.00....(much better!)...

                  and put 1 issue to bed...
                  You still shopping for boots? Lurch has some 650 parts up for sale in the parts section. I saw the parts bike and all looked pretty decent. I would say getting some used boots in good shape is a much better option than new ones for something that expensive. Some of the old rubber survived some didnt, really depends how it was used and stored.

                  Comment


                    #10
                    okay.. so i have the orings.. but this may sound dumb but i dont understand how they fit in the boot.. there is a metal type oring but thats not what i got to replace

                    Comment


                      #11
                      Im having the same problem. It's the last problem before my bike is 100%. My mechanic thinks it's an air leak. It sits around 4000rpms at idle, mostly when Im at a stop sign. I wonder if it's any of the aforementioned problems such as: petcock vacuum leak, carb boots, or bad o rings.

                      Comment


                        #12
                        Originally posted by Dmason View Post
                        Im having the same problem. It's the last problem before my bike is 100%. My mechanic thinks it's an air leak. It sits around 4000rpms at idle, mostly when Im at a stop sign. I wonder if it's any of the aforementioned problems such as: petcock vacuum leak, carb boots, or bad o rings.
                        Leaking intake boot O-rings is the number 1 most common GS problem - it causes the idle to hang, and sometimes never come down. Apparently you guys don't do maintenance on your bikes, and don't read the archives either.
                        Ed

                        To measure is to know.

                        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                        Comment


                          #13
                          Originally posted by Nessism View Post
                          Leaking intake boot O-rings is the number 1 most common GS problem - it causes the idle to hang, and sometimes never come down. Apparently you guys don't do maintenance on your bikes, and don't read the archives either.
                          Hey hey hey now, take it easy on a newbie. I bought this bike broken and am in the process of having it fixed. This is my first bike, and I wanted one so bad, that I made the mistake of buying a money pit from a guy that scammed me. It is now essentially almost 100% and I have made great strides to get this thing working.

                          But to hear it might be something as simple as a leaking intake boot O-ring is music to my ears. Thanks Nessim. Looks like its time to hit up cycleorings.com

                          Comment

                          Working...
                          X