I was admiring/showing off the GS in my father in law the other day and I noticed a slow drip, drip, drip from the intake side of the right hand carby (these 550's have the siamese carbs). I catch a drip and sure enough it is fuel.
Having read here numerous times that a leaking petcock is a common enough issue, I pull the vacuum tube and plug it and set the petcock to prime. The bike started to act like it was running lean. I tried to give it a fastest idle tune (which never worked before) and sure enough it would now tune fine. I had to turn down the idle speed screw about 4 turns by then end of the tuning process. It now starts great (although it did start great before) and idles smooth as silk. It also returns to a steady idle soooo much faster now.
I tried to see if I could 'suck' any fuel through the petcock vacuum port. No liquid came through but I definately had the 'taste' of fuel in my mouth.
SO now I guess I need to find a new petcock.....Anyone know of a good supplier in OZ that wont break the bank?
For now atleast I just need to remember to turn it to prime to run and to run to stop....Makes perfect sense!!??
Comment