Announcement
Collapse
No announcement yet.
rebuilt carbs but not boggs at 4000 rpm only
Collapse
X
-
ronc650
rebuilt carbs but not boggs at 4000 rpm only
Hello, I have a 82 Suzuki GS650E. It is stock, It did not run, so I rebuilt carbs. it runs good now but at 4000 rpm it boggs. If I let off gas and go very very slow and smooth it will get up to speed. Also when I rev the engine while sitting still sometimes it will rev very high and sometimes boggs. but always at 4000 prm. Thanks for you advice.Tags: None
-
ronc650
Yes, but I didi not have the original screws. It could be a small gap 1/8 at bottom. but it is all attached.
Comment
-
Raven457
-
Originally posted by ronc650 View PostIt could be a small gap 1/8 at bottom. but it is all attached.
How did you set your mixture screws? Might need to turn them out a bit.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Skateguy50
Originally posted by Raven457 View PostIntake boots/orings?
Also as I learned from experience "rebuilt my carbs" could mean a HUGE range of things on here and might still required some work. It only took me 10 or so times to learn that lesson, good news is I am very good at removing and installing my carbs.
Comment
-
ronc650
The intake boots and o'rings are new. But I will fix the gap on bottom of airbox. I know what you meen abouth the carbs I have take them off and put them on several times. LOLThanks guys
Comment
Comment