Announcement

Collapse
No announcement yet.

fuel line routing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    fuel line routing

    so my project bike has been apaart so long, i cant figure out where all the lines off the carbs go,...

    i know i have the main fuel line from the petcock but i dont know which port on the carb that goes to.
    i have the petcock vacuum line but dont know which port it goes too,
    and theres another large size port on the carb i dont know what goes on there. ..

    i saw something on an answer site that said it might be a spliter kinda deal im missing, so the 1 main line goes to a T that goes to each carb but i never had any of that, i just feel really stupid i cant figure this out, its not on the parts diagrams on bikebandit or in my clymer manual.

    this is my first bike and i got a project so im very green on the whole process, i know its something stupid simple but it just hasnt came to me yet.

    1985 gs 550 es

    its the mikuni 2 duels ( o o ) ---( o o )
    theres 2 ports on 1 side and 1 on the other, 2 are flat to the ground 1 goes up at like a 45

    #2
    Greetings and Salutations!!

    Hi Mr. gothera,

    I just stopped by to welcome you to the forum in my own, special way.

    If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

    Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...

    Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

    Thanks for joining us. Keep us informed.

    Thank you for your indulgence,

    BassCliff

    Comment

    Working...
    X