Announcement

Collapse
No announcement yet.

Stock Jetting Settings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Stock Jetting Settings

    So today I was working on my carbs and I decided, on a whim, to check what the stock jetting is supposed to be. My exhaust and airbox are all stock so this should really be what my jets are. I found that I should have 80 mains and 15 pilots. When I looked at what jets I actually had I found 1 80 and 3 too scarred to read. And 50's in ALL the pilots.... What the heck?

    In my parts bin I have a few 92.5 mains and MORE 50 pilots. is this the cause of my starting issues? It has started on these settings before.

    EDIT: I may have figued this out... its the pilot NEEDLE thats 15... alrighty... disregard me..
    Last edited by Guest; 09-02-2010, 12:02 PM.
Working...
X