The recommended strength is two parts Pine Sol to one part water. The recommended soaking time is two to three days though the carbs in these pictures were only left overnight.
Announcement
Collapse
No announcement yet.
Pine Sol for carb dip
Collapse
X
-
Pine Sol for carb dip
I found this on a Honda Nighthawk website. A lot of them claim to have tried it and no complaints. Anyone ever heard of it before? Any thoughts?
The recommended strength is two parts Pine Sol to one part water. The recommended soaking time is two to three days though the carbs in these pictures were only left overnight.
Last edited by dpep; 09-08-2010, 12:59 PM.Believe in truth. To abandon fact is to abandon freedom.
Nature bats last.
80 GS850G / 2010 Yamaha Majesty / 81 GS850GTags: None
-
Hammered
Cant see it, Id have member up. It is a degreaser so... Maybe if was done in a warm pot of the stuff for a day or so. It takes the crud off most other stuff.
-
Hammered
Seems the Honda site isnt the only place. HAMB, KZ's site and XS site and a list of others. Search PineSol for cleaning carbs. One report was that it dissolved the plating on the chock shaft and linkage. And heres a link to a 914 site with pics. Seems to work. Who knew? http://www.914world.com/bbs2/index.php?showtopic=109676
Comment
-
Flaming Chainsaws
A gallon of Berryman's costs about $20. But this Pinesol might actually be worth a try I have like 10 gallons of Pinesol... Should I do it? I haven't cleaned the carbs yet.
Comment
-
makenzie71
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
There was buzz a while back (maybe still?) about boiling carbs in lemon juice so I tried. Turned the carb body dark. Not good. Maybe I left it in the sauce too long? Not sure but I don't see the point in straying away from the tried and true.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
the wifey uses pinesol to clean many household items. It does a pretty good job of it but I haven't tried it with carbs. She dilutes it a lot with water.1979 GS850G
2004 SV650N track bike
2005 TT-R125 pit bike
LRRS #246 / Northeast Cycles / Woodcraft / Armour Bodies / Hindle Exhaust / Central Mass Powersport
http://s327.photobucket.com/albums/k443/tas850g/
Comment
-
SteveM
I was able to see the thread and all the pictures and the results were amazing considering all he did was soak the carb bank in the Pinesol overnight.
Comment
-
SVSooke
Originally posted by SteveM View PostI'm registered on the Nighthawk forum as I used to have a Honda. I can email you a PDF copy.
Comment
-
SteveM
Originally posted by SVSooke View PostThanks send it to snooksdad@gmail.com .Last edited by Guest; 09-08-2010, 10:31 AM.
Comment
-
sschering
Those Webber carbs on the 914 site came out nice but he said it lost it's kick after a few carbs..
My Napa dip can is going strong after cleaning a rack of carbs, brake parts, and loads of nuts and bolts..
Might be worth trying on larger parts like heads and cases.. It would be easy to mix up a big rubbermaid tub of the stuff..
Comment
-
ED the lemon juice thing will turn any aluminum dark from the citric acid..I tried Naval jelly once on a suggestion on some old clutch covers before doing it to my good engine and it seems the phosphoric acid in that does the same thing..i think its all about any acid will darken the aluminum..MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
Comment
-
deville
Comment