.png "Powered by vBulletin")
What carbs if any other will fit this bike? Got it with three sets of damaged carbs in a box
Thanks
Thanks
-
-
with three sets you cant rebuild one? -
I don't think so. One looked like it was stored on the bottom of the ocean. Another is physically cracked in several places and the third I didn't INspect that closely by the guy that I got it from said he stripped and broke the pilot screws. I just got the bike and I'm trying to get a jump on carbs so I can get it running. But I will sit down with them and see what I can do before I buy anythingComment
-
With three sets you should be able to find most of the parts you need. Once you take inventory you might want to post an ad in the Parts Wanted forum to fill out your set.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
I specialize in deep sea carb cleaning.
1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
I'm pretty sure that short of ACTUALLY storing a set at the bottom of the ocean (salt water would be pretty corrosive) these carbs clean up real nice... Also broken pilot screws can be fixed... probably easily.Comment
-
Alright im gonna post up some pics and maybe you guys can help me out a lil cause they don't look useable to me but I'm no expert.Comment
-
ok i came home and looked at them again....one set is so corroded I cannot begin to describe it. the other set has three out of the four carbs cracked. Now i dont know what you would call it where it is cracked but it does not unbolt from the carb, it is part of it. and the third set....again not sure what it is called but when you hold the set a certain way looking down on them there is an adjustment screw for wach one. the two in the middle have the heads broken off. If somebody wants these carbs I will gladly give you all three for a set that is complete and no physical damage. If it needs a rebuild or cleaning thats fine but I dont want to put the work into the ones I have. Also can anybody tell me what carbs I am looking for when trying to get new ones? Is it just 1980 GS 550 or any other years or models.
thanksComment
-
This guy is selling some appropriate carbs...http://www.thegsresources.com/_forum...d.php?t=165874Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
So there is no others that would fit this engine??Comment
-
GS 550, 650, 750 and 850 from 1980 all used the same basic carbs.Comment
Comment