Mixture jet washers

[old_chopper]

I am rebuilding a set of BS34 carbs and I need 3 of the little washers that go on the mixture jet screws. They were missing two and I dropped one that disappeared. I have been reading old posts because I thought I read Radio Shack has them but I couldn't find the post. If you know where I can get them or if you have 3 to spare please reply. Thanks in advance!

[Tracer]

If you have one as a sample, you may be able to match it with something from your local hardware store. Among their fastener drawers, there may be some that have "miniature" nuts, screws, washer's etc.

Another source might be MikesXS, which specializes in Yam XS650 parts. The 80-84 carbs are Mikuni BS series, and Mike supplies lots of jets and parts for them. For $4 you can get replacement washer, o-ring, and cap for the mixture/air/pilot screw. Here's the link, you'll need to scroll down a bit:

http://www.mikesxs.net/products-37.html#products

Good luck!