Announcement

Collapse
No announcement yet.

Carbs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Carbs

    I have run Mikuni 36 mm RS flatslides for ten years. Even with push-pull dual
    throttle cables, these carbs will hang up often even under normal driving.
    Anyone know of a fix?

    #2
    Sounds like an air leak.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      tighten the spring on the shaft..move it to the next bump.
      the throttle will be harder but this is what i do as i really dislike push/pull throttles.

      Comment


        #4
        Carb Issue Solved

        Found out that the "push-pull" throttle cables are actually "pull-pull"(pull open,pull shut) and the issue was solved by simply taking all the slack out of the pull-shut cable. It now shifts at any RPM like a stocker. After a long time,Yahoo!

        Comment


          #5
          Originally posted by rlv1100 View Post
          Found out that the "push-pull" throttle cables are actually "pull-pull"(pull open,pull shut) and the issue was solved by simply taking all the slack out of the pull-shut cable. It now shifts at any RPM like a stocker. After a long time,Yahoo!
          Glad you figured it out.

          I'd love to here someone logically explain why people refer to the cables as "push-pull".
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment


            #6
            Originally posted by Nessism View Post
            Glad you figured it out.

            I'd love to here someone logically explain why people refer to the cables as "push-pull".

            I think they mean "OPEN-CLOSE" Ed.

            Comment

            Working...
            X