Where to buy pilot air screw?

[Pureformance]

81 gs650g. Ive been looking through the vendors sites with no luck on an individual pilot air screw. Of course the last carb out of 4 i was working on had to strip the head of the screw. I also had a slight problem getting the pilot jet itself out and i think ill just order a new jet altogether as well. I see that z1 has a rebuild kit that contains said screw/jet but i was wondering if that jet was of inferior quality as opposed to the oem jet. IF its a good quality jet ill just order that, but if not i hate to order a whole kit just for the screw.

[Wallowgreen]

Post up in the parts wanted section for what you need. Original parts are of superior quality than aftermarket replacements. Someone out there will have what you need. Chef does a lot of work on these carbs for people, perhaps he might be able to help.

[Ranger]

I had to order through parts unlimited, runs about $11 per screw and the quality was actually great. The head had a deeper slot with a tool similar to dirt bikes so I could adjust it with ease without removing the tank that fit perfectly.

[Pureformance]

ok thank you guys! no project would be complete without something to go wrong aye?

[Pureformance]

This appears to be identical, anyone know for sure? http://cgi.ebay.com/ebaymotors/SUZUK...Q5fAccessories

[oldgrumpy]

carby jets,,,,

hi i,m in australia,,, and for my old bikes the dealer shops like to stick a gun in my back,,,, but in all honesty i,ve found Z1 in the usa brilliant for parts and great on cost.. hope this helps you regards david

[Graham]

Try here.

http://www.pjmotorsports.com/

[chef1366]

I have some

[Ranger]

I have some

Mine come in today.

[Pureformance]

I have some

wish i had seen this sooner. ended up ordering a kit on Z1. Thanks though