1982 GS750T Tank Question

[stevee401]

Do any other models have the same tank mounting? Mine is rusted to bits and am looking for something that will fit. Don't care about exterior just interior. Little rust is okay. I have a line on a 83 750 ES model. Does it fit? My T model has 2 mounting holes going vertically. Any help will be greatly appreciated. Thanks.

[stevee401]

No one has any idea what will fit? Someone needs to start a spreadsheet so people can see what parts fit what different bikes. Thanks

[cowboyup3371]

Stevee, go out to the parts fiches like www.alpha-sports.com and get the part number from your bike, then go to any other site like www.babbittsonline.com and do a reverse parts number lookup. If it does fit on other bikes, than it will show up in the results listing. If not, than no.

Remember too that if you are handy with a welder, grinder, and other tools than you might be able to MAKE it fit.

[81ZUKI75]

Do any other models have the same tank mounting? Mine is rusted to bits and am looking for something that will fit. Don't care about exterior just interior. Little rust is okay. I have a line on a 83 750 ES model. Does it fit? My T model has 2 mounting holes going vertically. Any help will be greatly appreciated. Thanks.

I feel your pain . I wanted to replace my 1982 T's original tank which I had to patch with good ole JB weld. The '82 and '83 T model's are mechanically identical, so I found a replacement on eBay after a lot of searching on-line salvage yards and craigslist. It didn't leak but was full of rust and had a rather poor rattle can paint job. I'll wind up painting it and keeping the original for a spare I expect.

But to your original question. Lots of the Zooks have the same rear mounting tabs. The trick is the front mounts. You'll notice on your frame that there's another mounting point, forward of the ones used. I suspect, though I've never tried it, that welding a mounting stud and cushion at that location would broaden the selection of tanks to choose from. My GUESS is that a 1983 ES tanks won't work without serious modification. But before you give up on it, measure the distance between the front and rear mounting points and check against the replacement tank.

Seats and side covers are the same way unfortunately .
I've found seats on craigslist and eBay from time to time. I've bought two . The second is in transit and I hope it's a GOOD one .

[stevee401]

Is it just the 82 and 83 that are the same? I thought it was 81-83. I might have a line on a 81 so I would like to know. I might just something on Ebay and weld/ hammer to make work. Thanks for help guys.

[81ZUKI75]

Is it just the 82 and 83 that are the same? I thought it was 81-83. I might have a line on a 81 so I would like to know. I might just something on Ebay and weld/ hammer to make work. Thanks for help guys.

The GS750T was available as a 1982 (year code Z, which I have) and as a 1983 (year code D).

The 16 Valve GS750E was available in 1980 (year code T), 1981 (year code X, which I have) and 1982 (year code Z). The GS750EZ (this would be a 1982) differed from the previous years mostly cosmetically in that they returned to the round headlight and a different gauge pod. There were minor mechanical differences.

The E models tank-mounts are completely different than on the T. But hammers, tourches, and such might make anything work.

[BassCliff]

Hi Mr stevee401,

No one has any idea what will fit? Someone needs to start a spreadsheet so people can see what parts fit what different bikes. Thanks

Someone has. You can buy it here:

Parts Cross-Reference Software - For Suzuki and other motorcycles (a commercial product, about $25)
http://zedder.com/catalog.htm

Or use the procedure described below:

Alternate (Free) Parts Cross-Reference Procedure - using a couple of our favorite online resources.

1. Start here:

http://www.alpha-sports.com/suzuki_parts.htm

2. Find your bike by year and model. Select the part you wish to reference.

3. Identify the part number, right-click and copy the part number.

4. Then use Babbit's cross-reference utility here:

http://www.babbittsonline.com/pages/parts/viewbybrand/1/default.aspx

5. In the pull-down menu labeled "Brands", select "Suzuki".

6. Right-click and paste the part number copied from alpha-sports into the line labeled "Search for".

7. Click "Quick lookup".

You are then presented with every model that the referenced part will fit.



Now let me share some GS lovin'.

I just stopped by to welcome you to the forum in my own, special way.

If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...

Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

Thanks for joining us. Keep us informed.

Thank you for your indulgence,

BassCliff

[UncleMike]

Buddy of mine who bought my 750T has a spare '82 tank he'd probably be willing to sell. Black/gray paint scheme and dent-free. Has a couple of scratches that got through the clear but I don't think they made it to metal. The inside was coated by the PO, but it would need to be re-done.

Haven't seen it for a couple of years, so this is a "best recollection" description.

[cloudbreakmd]

I have a tank for sale if needed. Red/black but has been Kreemed inside. Woulld be willing to part with my spare tank to help someone out if they really need it.

[dennislee78]

Are any of these tanks still available?? Recently had a guy patch a small hole in my tank and when i fot it back the whole side of the tank had caved from him welding it to hot!! I need a replacement tank for my 82 750t.....