Announcement

Collapse
No announcement yet.

Runs but blow gas out the exhaust

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by Steve View Post
    By the way, what was your incentive to use PineSol to clean the carbs? I don't remember ever seeing that anyone had ever tried it,
    let alone been successful with it. Most of us (in the USA) use Berryman's Carb Cleaner Dip.
    It does not cost that much more than the same amount of PineSol, and is known to do the job correctly. :
    .
    Perhaps this?


    Daniel

    Comment


      #17
      Originally posted by Adler View Post
      ..., Its hard to find something like berrymans outside of the states, so alternatives must be found!
      That's why I put that "(in the USA)" qualifier in there.

      Don't know if the Yamaha carb cleaner is available where you live, but I hear that's a good alternative.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #18
        Ok finally got the pilot jet in and it runs good now. Forgot to replace intake o rings so just got those ordered and will install them as soon as I get them. next is to sync the carb which I don't know how to do. Any help would be great. Thanks all for the help.

        Comment

        Working...
        X