Announcement
Collapse
No announcement yet.
Mac Exhaust
Collapse
X
-
emjay
-
mlinder
From BikeBandit
"Greetings Mark,We are writing to inform you that due to high demand the item(s) listed below in your order VMA1UCA have been delayed from the manufacturer by 1-4 business days. We will ship your order when this item(s) arrives."
Right, because we know how high a demand Mac exhausts for GS650's are, right??
Comment
-
Comment
-
mlinder
Originally posted by duaneage View Posthttp://www.thegsresources.com/_forum...highlight=jama
It sounds so sweet, and midrange performance is definately better.
Comment
-
mlinder
I'm going to call bike bandit today. If the Mac hasn't shipped yet, I will cancel the order and try the Marshall.
Comment
-
mlinder
-
mlinder
Purchased!
I'm excited to see this exhaust.
It does look higher quality than the mac, and not much more money.
None of my friends here in the PNW have a Marshall, that I've seen, anyway.
Since the bike frame is actually a 550, and the top end of the engine is a 650, I ordered the 650 setup. I will probably have to fab mounts, but not an issue.
Will keep you updated.
Comment
-
PM when you get it, I can help with installation tips. There are some tricks to getting it on right.
I would recommend going up on the jet two sizes to 115 or 116. the bikes are jetted lean for emissions and with the pipe it will be leaner. I went to DJ 124 which is about a 116 in Suzuki and had no flat spots and it pulls right up to redline.1981 GS650G , all the bike you need
1980 GS1000G Power corrupts, and absolute power corrupts absolutely
Comment
-
mlinder
Originally posted by duaneage View PostPM when you get it, I can help with installation tips. There are some tricks to getting it on right.
I would recommend going up on the jet two sizes to 115 or 116. the bikes are jetted lean for emissions and with the pipe it will be leaner. I went to DJ 124 which is about a 116 in Suzuki and had no flat spots and it pulls right up to redline.
I will have to fab mounts anyway. It's going on a 550 frame.
Since intake is not stock, either, lots of jetting changes will be required.
At some point, I may try to fit EFI to it.. but thats for later.
Comment
-
850GT_Rider
Where did you get the Marshall from?
It looks like the muffler mounts low, like the OE, instead of upswept like my V&H 4-1. Might be just what I'm looking for to clear the bags
Comment
-
mlinder
Ordered from http://laser-exhausts.com/
They are backordered right now. Mine will be delivered in 3 to 4 weeks.
Comment
-
mlinder
-
850GT_Rider
Yes - GS850G
In the interest of budget, might just get a muffler. I wrote to them with the inquiry.
I'll let you know!
Comment
Comment