RS Series carbs what throttle

[Guest]

I am going to be putting a set of RS series 36mm carbs on a 83 -1100 This has the single throttle cable and the RS I believe uses the push / pull . I would like to keep the stock switch housing . What are you guys using for a throttle with these carbs ?

[El Giablo]

I usually use an earlier housing (GS 1000). I found a second hole on one of my '83 1100 throttle assemblies. If yours has two holes, you could route the cables accordingly. El G.

[rapidray]

You can also buy the Motion Pro push pull assembly from APE or other suppliers. Ray.

[Billy Ricks]

I don't think they are available anymore but Yosh use to sell a push/pull assembly with switchgear. It even had a switch to turn the headlight on and off. This is one on my bike.

[blowerbike]

i like tightening up the carb springs and running a stock single pull on street bikes.
thats just me though.