Announcement

Collapse
No announcement yet.

Carb ID

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Carb ID

    Can anyone ID these carbs and possibly have any idea on their value? Came in a box of Kawasaki parts.


    IMG_0005_2246x1685 by azr33, on Flickr


    IMG_0004_2246x1685 by azr33, on Flickr


    IMG_0003_2246x1685 by azr33, on Flickr


    IMG_0002_2246x1685 by azr33, on Flickr
    Rob
    1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
    Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533

    #2
    that looks identical to my 1981 gs 1000 g carbs

    Comment


      #3
      Actually it looks like a LOT of GS carbs.

      What is the inside diameter of the outlet of the carbs?

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        inside diameter for carb outlet is 47.5mm
        Rob
        1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
        Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533

        Comment


          #5
          Originally posted by Steve View Post
          Actually it looks like a LOT of GS carbs.

          What is the inside diameter of the outlet of the carbs?

          .
          You could delete GS from above - could be from a wide range of bikes.
          79 GS1000S
          79 GS1000S (another one)
          80 GSX750
          80 GS550
          80 CB650 cafe racer
          75 PC50 - the one with OHV and pedals...
          75 TS100 - being ridden (suicidally) by my father

          Comment


            #6
            Hi,

            I don't think they are, but just in case, check out THIS THREAD in the gixxer.com forum (starting in post #10) about the Mikuni BST (Slingshot) carb series. It's a 'clean up and rebuild' how-to thread.


            Thank you for your indulgence,

            BassCliff

            Comment


              #7
              Plastic top and black slide. Looks identical to the 32mm CV's that were installed on the '83+ 700/750E/ES
              Ed

              To measure is to know.

              Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

              Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

              Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

              KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

              Comment


                #8
                Originally posted by hampshirehog View Post
                You could delete GS from above - could be from a wide range of bikes.
                Well, there are several bikes that use Mikuni CV-type carbs, but some have accelerator pumps and other stuff.
                These look just right for a GS.
                In fact, the "choke" mechanism says " '82 or newer", even though I don't see the channel on #2 carb that directs the cable to the mechanism.


                Originally posted by azr View Post
                inside diameter for carb outlet is 47.5mm
                47.5 mm???

                No, HERE is where to do the measuring:


                .
                sigpic
                mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                #2 son: 1980 GS1000G
                Family Portrait
                Siblings and Spouses
                Mom's first ride
                Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                (Click on my username in the upper-left corner for e-mail info.)

                Comment


                  #9
                  The ID and the carb spacing will tell you what they fit

                  Geez, Rob, do you have that shed overflowing with motorcycle parts now?
                  1978 GS 1000 (since new)
                  1979 GS 1000 (The Fridge, superbike replica project)
                  1978 GS 1000 (parts)
                  1981 GS 850 (anyone want a project?)
                  1981 GPZ 550 (backroad screamer)
                  1970 450 Mk IIID (THUMP!)
                  2007 DRz 400S
                  1999 ATK 490ES
                  1994 DR 350SES

                  Comment


                    #10
                    Opps my bad.....that measurement would be 31.5mm. So that's the carb outlet I've had these kicking around for a couple of years but they just sit there and they are BRAND NEW, not rebuilt brand new from the factory. They need to be used. I've hunted online with the carb ID numbers to no avail, I'm hoping the combined wisdom on here will come through. I tell you I've got to get rid of some things, I just phoned somebody about an 1980 GS250 they have, I'm still wanting to get the 400cc or smaller to go back and forth to work (way cheaper insurance). Turns out this person also has a 79 1000 they want gone!! Somebody give me $600 and convince my co-pilot I can have 2 more bikes!! The plan is to sell the 79 850 and my extra 78 1000 as soon as they are finished but that won't be for a couple of months. Oh what to do, what to do.
                    Last edited by azr; 01-19-2011, 07:15 PM.
                    Rob
                    1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
                    Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533

                    Comment

                    Working...
                    X