.png "Powered by vBulletin")
i was rebiulding my carbs on my gs750 and was almost done when the worst happened. i was running my fuel srews in to lightly seat them then back them out when i noticed a piece of one sticking through the little whole. ive tried everything i can think of but still cant get it out. ive even tried heating the carb in the oven a little thinking it might help to loosen it but no luck. please help!
-
-
There is a ton, and I mean a ton of info related to this specific problem in the site, just use the search function.Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533 -
Yea archives. Tons of info there all waiting for the newbies to find with a little searching.
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
ok. thanks guys! sorry. i was just freakin out. lol. guess i need to find some new ones now. thanks again!Comment
-
another stupid question. i've tried searching and havent found anything. does anyone know where i can get new fuel screws?Comment
-
Z1 sells (or at least used to sell) a rebuild kit that came with the fuel screw. I ordered a few sets for my 79 850 but they have the same fuel screw. Look on ebay as well, I've seen several different vendors selling carb rebuild kits that included the fuel screw, be careful where ever you buy the kit though, most kits do not include the fuel screw, just make sure you ask specifically.Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533Comment
-
Yet another question that can be easily answered with a search.Originally posted by shinzon1 View Post
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
ok. thank you! for info: i did search and couldn't find anything.Comment
-
Hi,
Here are just a few of the vendors in your "mega-welcome" that sell carb parts. Chances are that you may have to buy entire carb kits to get the pilot screws (around $25-$30 per kit - you'll need 4). Do some shopping around, send an email or two, etc. Availability and prices often change from vendor to vendor. Z1 is a great place to start. Then...
Sudco International - Carburetor parts, Classic & Late Model Replacement & Performance Parts, etc.
http://www.sudco.com/ (http://www.sudco.com/oemcarbparts.html)
MotorcycleCarbs.com - Carburetor parts, etc.
http://www.motorcyclecarbs.com/index.cfm
Jets R Us - Carburetor parts, filters, gauges, etc.
Parts'n'More - Classic UJM parts (i.e. gasket sets): $35 minimum, $5 shipping to lower 48
Thank you for your indulgence,
BassCliffLast edited by Guest; 01-28-2011, 02:20 PM.Comment
-
The trick is to use the ADVANCED SEARCH, and then set the search to TITLES ONLY.Originally posted by shinzon1 View Post
Searching "fuel screws" turned up these threads. Some are about getting the broken tips out and others are for sourcing new screws.
.png)
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
ahh... thats the trick. thanks!Comment
Comment