82 gs850gl jetting

[kennyrandolph]

I was wandering if anyone could tell me what size jets i should use on my bike. I Have a 4 into 2 open exaust (no baffles, just straight pipe) I ordered a k&n pod filters for it. I also ordered a dynojet stage 3 jet kit. It comes with 155 160 and 165 main jets. IF anyone has a similar setup i would appreciate a little insight as to what your exact setup is. thanks

[Octain]

Follow the instructions that came with the kit to a T and you'll be real close to dead spot on.
I run the 165's in my 850G with K&N's and a four into one.
Dont forget to install NEW plugs.

Welcome to the forums!

[BassCliff]

Greetings and Salutations!!

Hi Mr. kennyrandolph,

Yes, the Dynojet kits are pretty much plug-n-play. Check your spark plugs to fine tune, see the "plug chop" method link on my little website. Let me share some more GS lovin'.

I just stopped by to welcome you to the forum in my own, special way.

If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness" the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...

Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

Thanks for joining us. Keep us informed.

Thank you for your indulgence,

BassCliff