What headers will fit a 83 GS850G

[p47b]

I posted this on the performance & tuning with no reply. So after a week of looking I am still not to sure if they will fit.
Any one know?
I have a 1983 GS850G and no exhaust.
I have a led on a set of 96-99 GSXR750 headers.
I know that they are not a direct bolt up.
What I am asking is the spacing, Diameter of pipe, & the rings all the same?
I was going to make a header for it but for the price of $30 I was going to see if this might work.

[BassCliff]

Greetings and Salutations!!

Hi Mr. p47b,

Do you know how to use a ruler?

Yes, you'll have a good time modifying the exhaust to fit your bike. I'm sure it can be done with enough material, skill, time, and money.

Let me dump a TON if information on you and share some GS lovin'.

I just stopped by to welcome you to the forum in my own, special way.

If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Rebuild Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. Now let me roll out the welcome mat for you...



Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

Thanks for joining us. Keep us informed.

Thank you for your indulgence,

BassCliff

[p47b]

Thanks

Thanks, I was wondering if I had asked a stupid question. There for no reply.
Yes I can do all that. I do not have access to the header that I am looking at. Pipe dia. was my biggest concern. Everything else might fall into place.

[BassCliff]

Hi,

Unfortunately, I didn't measure the exhaust output on my bike when I had the exhaust off (maybe it's in the manual?) and I don't know the size of the header you are looking at. Take your measurements and see if it's going to fit. If you go ahead with the project, please take lots of pictures and post them up here. We'd love to see the process.


Thank you for your indulgence,

BassCliff